Below is a list of products TSI Touch recommends to help provide optimal performance for our Touch Solutions:

USB 3.0 Powered 4-Port Aluminum Hub: IOGEAR met(AL) P4P Hub

The IOGEAR Powered USB Hub will provide its own Power Supply for USB connected Touch Solutions. This USB Hub will give you the benefit of extra USB ports, while not drawing extra power from your computer.

Specs:

• Power Input Rating:      Per AC Power Inlet, 50/60Hz DC5V@4A
• Power Output Rating:    Total AC Power Outlet, 50/60Hz DC5V@2A

Additional Specs and Information can be found at the following link:

www.iogear.com

ICRON RANGER: USB CAT 5e/6/7 Extender System

The Icron Ranger provides USB 2.0 extension up to 480Mbps over CAT 5e/6/7 cabling. The Ranger 2304 is a plug-and-play solution with no need for additional software drivers.

Specs:

• Direct connect range up to 330 feet
• Supplies up to 600mA to each USB port concurrently

Additional Specs and Information can be found at the following link:

www.icron.com

Apricorn: USB3 Power Adapter Y-Cable

A USB Female to Dual Male adapter will provide power from multiple USB ports to the Touch Solution.

Additional Specs and Information can be found at the following link:

www.apricorn.com

USB A to USB C Adapter

With some Media players having 1 USB A port, and 1 USB C port (ex. Brightsign LS424) A USB size adapter will also be needed.

Additional Specs and Information can be found at the following link:

www.usbgear.com